PC-47 Emerald Falls Pint

Amaco's Potter's Choice Glazes

PC-47 Emerald Falls
1 Pint

Emerald Falls is a beautiful glossy green glaze that breaks lighter and pools into a mauve grey-green. When heavier coats are applied this allows the glaze to float up and create interesting surface variations echoing mossy patches found in rolling emerald landscapes.

The Potter's Choice glaze series was designed with the potter in mind! These stunning glazes add fluid colors and effects to smooth or textured ware, with optimal results at Cone 5/6. To use these glazes is to step into different ceramic glaze traditions of many cultures throughout history. Check out PC Layering charts to see all the amazing results you can try in your own studio! If the application of this glaze is too thin, the surface will look splotchy and incomplete. For best results apply three thick coats and leave a little room at the foot for the glaze to move. Due to the powdered nature of the materials involved with the dry-mix dipping buckets of this product, their respective health information and labels differ from the brushing glazes.

- Reduction Effects in Oxidation
- Variety of Colors and Surfaces
- Cone 5 - 6
- Limitless Layering Combinations
- Foodsafe

Cone 5 = 1184°C (at 150°C/hour for the final 100°C of firing) / 2201°F ( at 270°F/hour in the final 200°F of firing)

Cone 6 = 1241°C (at 150°C/hour for the final 100°C of firing) / 2266°F ( at 270°F/hour in the final 200°F of firing)