Skutt KMT-1227-3PK, 208-volt, 3-phase, with touchscreen controller.-- Kiln Upgrades and Add-Ons --
Skutt’s production-ready KM-1227-3PK (production kiln) is designed specifically for volume production and fast turnaround of high-mass loads, and is the ideal size for many studios, as evidenced by this model being Skutt’s most popular production kiln. This kiln has the power and industrial components to go straight to Cone 10 with a full load of tile or stoneware - no slow struggling to reach the final temperature. The standard KilnMaster controller gives you the options of Cone Firing, or programming your own 8-segment Ramp/Hold firing programs. The combination of direct wiring, heavy duty elements, connectors and relays, plus traditional Skutt stainless steel and firebrick construction results in a kiln that will last for years of constant use.
Zone Control Type S Thermocouples Kiln Link App KM Easy View Enviro-Link Rolling Kiln Stand Small Stilt Kit Saftey Gloves Grinding Brick Vent Extension Kit Vent Duel Exhaust Kit
Vent Kiln Stand Adapter
This model differs from the Skutt KM-1227-3 (notice, no PK) in firing range - the non-PK version reaches cone 5-8 depending on voltage, so if you know you will need this kiln to go to cone 10, we recommend this PK version.
For maintenance convenience, every kiln of the KM Skutt Series is equipped with a current sensor that allows remote technicians to troubleshoot your kiln right over the phone. It can also check the board temperature, LED readout and a host of other useful troubleshooting data. The Skutt KM-1227-3PK also features balanced elements. The top and bottom of the kiln lose heat faster than the center so Skutt puts hotter elements (more power) in those areas. The Skutt KM-1227-3PK comes standard with 3" kiln brick. Soliod State Relays are also now a standard for the PK series.
Options for Customization:
The Skutt KM-1227-3PK comes with a few options for customization. First, select the correct voltage and phasing
from the drop-down menu above; if you are unsure of your space’s wiring, please check with an electrician. Next, you may select to order your kiln with the suggested furniture kit
Furniture Kit includes:
-- 8 - 26" half kiln shelves
-- 6 each of the following posts: 1", 2", 3", 4", 5", 6"
-- 1 lb. box of kiln wash
-- Heater Beater kiln gloves
You may also add a vent system
which is highly recommended for closed-air spaces. Finally, you may choose to upgrade your kiln to support APM elements
, which is a good choice if you plan to fire your kiln to cone 10 multiple times per week. You can also upgrade to the touchscreen controller, which makes operation as easy as working a smart phone!
Shipping rate applies only when shipping within the contiguous United States. For all other locations, call us for our best rates!