L&L E23T Element Quad 208V 3P

Please supply us with the serial number and model number of your kiln when purchasing these elements. Simply enter them in the "Comments" section during checkout. If you have a photo of the kiln plate please email it to Heidi@theceramicshop.com with your weborder # in the subject line once your order is placed.

This listing is for a single (1) replacement QUAD element for L&L kiln models E23T & E23T-3 with a power supply of 208 volts and three (3) phase.
There are a total of six (6) elements per kiln, each pair wired in parallel. (please call for pricing if your element pairs are wired in series)

L&L part #: E-E-23TU/22

Please read carefully to ensure that you are purchasing the correct elements for your kiln. The voltage and phase are listed on the kiln nameplate. Phase is important with Easy-Fire kiln elements because power and resistance are varied to maximize output on 3-phase kilns. Elements in each kiln are all the same resistance. There are no graded elements from top to bottom.

Please note: As of October 1, 2004, L&L has developed a larger, improved element for the Easy-Fire kilns. These are ½" in diameter (the previous elements were ?" diameter) and are, in most cases, thicker gauge wire. These will only fit in the new holders which appeared in kilns manufactured after June 1, 2004.

So, if your kiln was produced prior to June 2004, then you will need to purchase the SMALL (S) elements. Kilns after 2004 can accommodate the LARGE (L) elements.