$3,525.00 $2,669.00 $856.00
Item #: LE23T32401N0
L&L E23T-3 Easy-Fire Series kiln, 240-volt, 1-phase.
50% OFF Vent-Sure System when purchasing any L&L Kiln!
L&L’s Easy-Fire Series kilns are a great addition to any studio or classroom. All kilns in this series can be fired to cone 10, and come standard equipped with L&L’s easy to use 12-key controller, which allows you to use pre-programmed schedules, or store your own. The E23T-3 fires so evenly in part because the kiln is separated into three zones, managed internally by three separate thermocouples -- so if your kiln is hotter at the top than it is at the bottom, the thermocouples relay that information to the controller which then balances it all out. Like all L&L kilns, the E23T-3 is equipped with Dyna Glow Ceramic Element Holders. These holders protect your firebrick through years of Cone 6 and Cone 10 firings, promising better heat distribution inside the kiln, and ease in replacement of the elements when it becomes necessary. This kiln’s convenient 7-cubic-foot size and its long-lasting features have helped to make this one of our best sellers over the years. Additionally, the E23T-3 model features 3” brick walls (as opposed to standard 2.5” brick), which maximizes efficiency -- you’ll notice faster firings, and less of an impact on your energy bill.
Upgrade the 12-key controller to the new Genesis touch screen here!
Options for customization:
The L&L E23T-3 comes with several options for customization, so you can get the best possible kiln for your space. First, select the correct voltage and phasing from the drop-down menu above; if you are unsure, please consult with an electrician. Next, you may select to have your new E23T-3 constructed with high-power, production-level quad elements. If you fire to cone 10 on a regular basis -- think multiple times per week -- quad elements will greatly extend the firing life of your equipment. However, if you don’t fire that high, or that frequently, you will likely not notice much of a difference in performance. Finally, you may choose to order your E23T-3 with the suggested furniture kit, which includes two 20" full round shelves; four 20" half-round shelves; six each of 0.5", 1", 2", 4", 6" and 8" posts; heat-resistant gloves; and a 1-lb. bag of kiln wash.
If you have any questions about the E23T-3, give us a call -- we love to talk kilns!
Ceramic Shop Furniture Kit (Save money and get free gloves and stilts!)
Hollow Core Furniture Kit
Watch the DynaTrol Control in action
Read the specification sheet
Max Firing Temp: Cone 10 (2350F)
Inside Dimensions (inches): 22.5 Diameter x 27 High
Outside Dimensions: 31W x 42D x 42H
Cubic Feet: 6.7
Breaker Required: 60
Plug: NEMA 6-50
Shipping Weight: 360 lbs