L&L J1800 SS 240V, 1-phase

As per L&L's policy, you must supply us with the serial number and model number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.

Replacement element for L&L J1800 kilns (J18 and J18X) Jupiter Kilns. This element is a standard small element for a 240V, 1-phase kiln.

L&L part #: E-J-1800/30

Please note:
There are 4 elements in a J18 and 6 elements in a J18X.

Please read thoroughly to ensure that you are buying the correct element. Also visit our L&L Elements page for information regarding model numbers.

There are 4 types of elements available for the Jupiter Series - these relate to changes in the kiln model over the years. The first change was in January 1996, when L&L began using a slightly enlarged element holder. The next change came in June 2004, when an even larger holder was created.
The 4 element types include:

Standard Small
These elements will fit any Jupiter or K model kiln.

Heavy Duty (HD) Small
These elements are larger in diameter than the standard small and will not fit any model prior to Januray 1996.

Standard Large
These elements take advantage of the 0.5" diameter size of the newest holder design and the change in resistance when the elements get hot. These elements are standard as of October 1, 2004 and can be used in kilns made since June 1, 2004.

Heavy Duty (HD) Large
These elements also take advantage of the 0.5" diameter size of the newest holder design and the change in resistance when the elements get hot. These elements are larger in diameter than the standard elements, allowing for a thick wire with great stretch ratio and watt density.These are available for upgrade on kilns made since June 1, 2004.

All J1800 elements are wired in series.

As per L&L's policy, you must supply us with the serial number and model number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.