$67.00
Item #: LLE28ME410
Please supply us with the serial number and model number of your kiln when purchasing these elements. Simply enter them in the "Comments" section during checkout. If you have a photo of the kiln plate please email it to Heidi@theceramicshop.com with your weborder # in the subject line once your order is placed.
Easy-Fire e28M 208 Volt/1 Phase Large Element (.46" Outside Diameter) - Used on All e28M-3 Kilns at this Voltage and Phase
There are 5 of these elements per kiln. All elements have the same resistance (ohm) value.
Please read carefully to ensure that you are purchasing the correct elements for your kiln. The voltage and phase are listed on the kiln nameplate. Phase is important with Easy-Fire kiln elements because power and resistance are varied to maximize output on 3-phase kilns. Elements in each kiln are all the same resistance. There are no graded elements from top to bottom.
Please note: As of October 1, 2004, L&L has developed a larger, improved element for the Easy-Fire kilns. These are ½" in diameter (the previous elements were ?" diameter) and are, in most cases, thicker gauge wire. These will only fit in the new holders which appeared in kilns manufactured after June 1, 2004.