Ware Repair + Crack Pot (HFW)
$ 14.99 New Available online
The Ceramic Shop

Ware Repair + Crack Pot (HFW)



Available Options:

High or Low Fire:


Add to List
Add to Registry

Ware Repair and Crack Pot (High Fire - White)

Repair Kit Includes:

- Ware Repair 4oz

- Crack Pot

Ware Repair:

Oh no! Did you just bump into the shelf and knock your classmate’s bisqued pot onto the floor?? Well, don’t fret - with Mr. Mark’s Ware Repair you can glue that pot back together without them even knowing it broke!!

Oh, it was bone dry greenware?? Not a problem - Still fixable!!

That’s right. With Mr. Mark’s Ware Repair you can glue broken pots - both at the greenware and bisqued stages - back together. Once adhered, the pot can be fired and glazed as usual. What is great about Mr. Mark’s Ware Repair is not just its strength and durability, but that it can be covered with glaze. Often with other mending products, glaze is resisted in areas where the adhesive is applied. But not with Mr. Mark’s Ware Repair!

To Use:
- With a brush, apply Ware Repair to the edges of broken pieces to be attached. - Hold pieces together for about 5-10 sec and apply gentle pressure. Wipe away excess with a sponge.
- Clean brushes thoroughly after use.

For use with both low and high fire clay bodies and glazes (can be fired up to cone 10). Fires clear.

Available in 4 oz bottle.

Crack Pot:
Crack Pot is a colored clay like material designed to be filled into your bisqueware cracks. It was created as a complimentary product to Ware Repair. Crack Pot filler is easy to use. While it is a wet paste, fill your hairline or S-Crack in your ceramic piece. Work the paste into crack or opening with a small tool to achieve a tight fill. Let dry and fire. The paste can be sanded before it is fired to achieve a smooth flush surface. After the firing simply glaze over. Applying more glaze on the filler area is recommended as it may soak up more of your glaze than your bisque. Colors can be combined for custom matches.

Notes: Keep from freezing.
Size: 2 oz

Made in the USA and conforms to ASTM D-4236