KM-822 Kiln 240V 1P
$ 2110.00 New Available online

KM-822 Kiln 240V 1P

$2,618.00 $2,110.00 $508.00

Item #: SKM822X2401N0

Available Options:




Made to Order: Will ship in 4 to 6 weeks

Skutt KM-822 pottery kiln, 240-volt, 1-phase.

Skutt’s powerful but compact KM-822 is a great choice for the studio with limited space that still requires easy firing to cone 10. The KM-822 is almost 2’ deep, meaning it’s great for firing taller work.

The kiln comes standard equipped with Skutt’s easy-to-use 12-key controller. In cone-fire mode, simply enter your target cone and then push a button to program a slow, medium, or fast firing program. Even the seasoned potter will find themselves using these time-saving buttons, but if you do intend to write your own programs, the Skutt controller makes that easy, too. This computer stores up to twelve programs with up to 32 steps each.

The KM-822 is sectionally-constructed, which means you can easily disassemble the kiln’s chamber when you are moving or repairing your kiln. Your kiln will have the versatility to fit through just about any doorway. The KM-822 comes standard with 2.5” brick -- if you are interested in 3” brick, please see our listing for the KM-822-3. This kiln also comes with a kiln stand with feet; instructional video; operating manual; an extra type-K thermocouple; warranty card; and peep hole plugs.

Every Skutt KM kiln is equipped with a sensor that allows remote technicians to troubleshoot your kiln right over the phone -- this sensor reads your voltage and amperage on your kiln’s controller, and can also check the board temperature, LED readout and a host of other useful troubleshooting data. Skutt kilns also feature balanced elements -- because the top and bottom of a kiln tend to lose heat faster than the center, Skutt has solved that problem by placing more powerful elements in those positions.

Options for Customization:
First, select the correct voltage for your space; if you are unsure, please consult with an electrician before placing your order. Please note that the KM-822 is only available in single-phase wiring.
Next, you may choose to upgrade to APM elements. If you fire to Cone 10 multiple times per week, these long-lasting elements will save you time and money in the long run. You may also upgrade the 12-key controller to a touchscreen, which makes operation as easy as working a smartphone!
Finally, you may opt to order your kiln with the suggested furniture kit.

Furniture Kit includes:
-- 6 - 15.5" half-round kiln shelves
-- 8 each of the following posts: 1/2", 1", 2", 4", 6"
-- 1 lb. box of kiln wash
-- Heater Beater kiln gloves

You can also add a vent system, which is highly recommended for closed-air spaces.

Related Items:
Rolling Kiln Stand
Grinding Brick with Handle

Shipping rate applies only when shipping within the contiguous United States. For all other locations, call us for our best rates!

Max Firing Temp: Cone 10 (2350F)
Inside Dimensions (inches): 18 Diameter x 22 High
Ship Dimensions: 32W x 32D x 37H
Cubic Feet: 3.2
Amps: 33.4
Plug: NEMA 6-50
Shipping Weight: 170 lbs