$5,831.53 $5,248.37 $583.16
Item #: PF500Y
Paragon F-500 Lamp Working Kiln
We are constantly improving the F-500. The kiln is designed for annealing large glass figurines, beads, and marbles and is made at the Paragon factory in Mesquite, Texas USA. Imagine the huge glass pieces you could make with a kiln this large.
The massive F-500, with its towering door counter-weights and handsome black finish, is a workhorse that will raise your production. The F-500 simplifies annealing so you can immerse yourself in creating breathtaking ware.
Raise the counter-weight vertical-drop door to insert a punty rod and glass. Lower the door. The punty rod extends outside the firing chamber through a smaller punty rod door. The main door is balanced so it stays open where you stop it. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.
Two 4" x 10 1/2" punty rod doors retain the heat
The main door includes two 4" x 10 1/2" punty rod doors. Two flexible gaskets under each door help to retain the heat. The punty rods can extend outside the kiln through the gap under the doors. This allows the doors to remain fully closed. The ceramic fiber punty rod doors are a full two inches thick to help retain heat. Rare-earth magnets hold the doors in the open and closed positions.
Adjustable rod rest
You can adjust the rod rest, which is positioned in front of the punty rod doors, with wing bolts. Adjust it horizontally and vertically without tools. Or remove the rod rest altogether when you don’t need it. You can order the optional stand for the F-500, with or without casters.
Durable 3" thick insulating firebricks; side elements
The insulating firebricks, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. The firebricks are 3" thick, 20% thicker than the standard 2 1/2" bricks, throughout the top, walls, bottom, and door. The heating elements are protected in dropped, recessed wall grooves for trouble-free firing. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available. The F-500 has no roof elements.
Heavy duty components
Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation.
Features of the F-500
- 3-key digital Sentry Xpress controller
- 15" deep firing chamber (measured with doors closed)
- 3" thick firebrick roof, walls, door, and floor
- Precisely balanced counter-weight vertical-drop door
- 2" thick ceramic fiber 4" x 10 1/2" punty rod doors with double gaskets
- Rare earth magnets hold the punty rod door open or closed
- Mandrel holder adjusts without tools
- 1200°F maximum temperature
- Dropped, recessed element grooves in the walls
- Mar-proof rubber feet
- On-off switch for your convenience
- Made in the USA
Thermocouple with "special limit" wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼" wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.
Please note that free shipping is only valid for the contigious United States.
Max Firing Temp: 1200F
Inside Dimensions (inches): 24W x 22.25H x 18D
Cubic Feet: 5.50
Plug: NEMA 6-30R
Shipping Weight: 614 lbs