Paragon E12T 120V

E12T Enameling and China Painting Large Kiln
The standard Xpress-E-12T is rated to 2000°F (1093°C). If you need to reach 2250°F (1232°C), specify either the 240 volt version or 3” thick firebricks instead of the standard 2 1/2” thick firebricks. Please contact us for details.

Create breathtaking jewelry or small keepsakes in silver clay, enameling, china painting, glass, lost wax casting, or bronze clay. Since the kiln opens from the front, it is ideal for copper enameling.

Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you years of creative enjoyment.

3" Additional Height than the standard E12
Paragon’s E12T Enameling and China Painting Large Kiln allows you to create larger pieces by giving you an additional 3" of chamber height.

Features the Updated Sentinel TouchXpress touch screen controller
TheE12T Enameling and China Painting Large Kiln comes with the Sentinel TouchXpress controller mounted in the kiln base (instead of a side switch box) to save table space. The kiln includes a door safety switch that turns off the element when the door is opened. The controller automatically resumes firing when you close the door.

Easy Maintenance and a Dependable Kiln
The E12T Enameling and China Painting Large Kiln heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace if ever necessary. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the element back on during cooling. (If extra heat is necessary to anneal large pieces, that is easy. Just program a slow cooling segment in Ramp-Hold mode.) The firebricks store heat for quick temperature recovery after removing a copper enameling piece.

The thermocouple is protected with a high-nickel stainless steel sheath for long life. A switch on the front panel turns off power to the controller when the kiln is not in use.

Unlatch and open the door with one hand; the latch operates so smoothly that delicate copper enameling or silver clay pieces remain undisturbed while opening or closing the door. The door opens smoothly on a heavy-duty 1/2” hinge shaft. No extra stand is needed; the built-in base stays cool even during extended hold times.

Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.

The interior is large enough to fire a 10” bronze clay container. A vent hole in the top, complete with tapered vent plug, is designed for lost wax casting. You can also vent combustible cork clay and other fillers used with silver clay.

Paragon’s E12T Enameling and China Painting Large Kiln Ships via UPS
The E12T Enameling and China Painting Large Kiln can ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.