)
Content: 1 x PP cartridge + 1 x rubber piston x G 1/4 to 1/2 male connector.
Cartridge material: PP Material.
Internal volume: 500ml.
The mass of a cartridge filled with clay: About 0.8KG.
The normal working pressure: 0.4-0.6Mpa, not more than 0.8Mpa.
This accessory has a G 1/4 thread that attaches to the outlet of the 500ml barrel, and a G 1/2 male thread on the other end that attaches to the feed port of the Potter extruder.
After the completion of the printing should be clean, avoid light preservation.
Cartridge material: PP Material.
Internal volume: 500ml.
The mass of a cartridge filled with clay: About 0.8KG.
The normal working pressure: 0.4-0.6Mpa, not more than 0.8Mpa.
This accessory has a G 1/4 thread that attaches to the outlet of the 500ml barrel, and a G 1/2 male thread on the other end that attaches to the feed port of the Potter extruder.
After the completion of the printing should be clean, avoid light preservation.
Share:
Share on Facebook Share on Twitter Share on Pinterest