)
Paragon CT122822 Viking - Heavy-Duty Reliability for Demanding Ceramic Work
Built on the Ceramic Top legacy—fortified for production-grade performance.
The Paragon CT Series—short for Ceramic Top—has long been trusted for its thoughtful design, consistent results, and studio-friendly features. The Paragon CT122822 Viking takes that foundation and reinforces it for heavy-duty, high-demand firing environments. Whether you're running full-capacity loads of stoneware or supporting daily cycles in a busy studio or school, the Viking edition is built to perform—day after day, year after year.
Why choose the Paragon CT122822 Viking?
The CT122822 Viking is a 12-sided round kiln with an interior diameter of 28” and interior height of 22”, offering a generous 8.11 cubic feet of firing volume. It's the perfect blend of capacity and accessibility—wide enough for large platters and batch loads, yet shallow enough for ergonomic loading and unloading. Rated for cone 10 and optimized for high-volume work, it’s an ideal choice for production studios, ceramic departments, and institutions that can’t afford downtime.
Built Viking Strong: What Makes It Heavy-Duty?
What sets the Viking edition apart is its reinforced electrical and structural system, designed for longevity under tough conditions:
- Upgraded high-amperage components for continuous cone 10 operation
- Industrial-grade wiring and relays for better durability under frequent cycling
- Enhanced circuit pathways for improved power handling
- Heavy-duty case construction and internal bracing to support daily thermal stress
This isn’t just a kiln—it’s a dependable production tool engineered to run hot, hard, and reliably.
Durability Meets Convenience
- 3” thick firebrick throughout for exceptional insulation and energy efficiency
- Sectional construction allows for easier maintenance, transport, and ring replacement
- Solid state relay (SSR) for quiet, long-lasting, and responsive control
- AOP (Auxiliary Outlet Plug) and vent-ready design, pre-drilled for the Orton Vent Master
- Dropped, recessed element grooves—no pins required
- Top row of grooveless 2” blank bricks helps reduce chipping during loading
- Reversible firebrick floor extends the lifespan of your kiln bottom
- Drop-down switch box, hinged at the base and supported by a fold-out arm, for easy servicing
- Paragon’s patented LiteLid spring lift system enables smooth, one-hand lid lifting
- Lock-in lid support with positive catch
- Large, tapered peepholes for clear visibility
- Fire directly on the brick bottom for full capacity
- Heavy-duty stainless steel case
- Certified to CSA and UL Standard 499
Controlled with Precision
The CT122822 Viking is powered by the Sentinel Smart Touch Controller, offering advanced scheduling, cone-fire and ramp-hold options, diagnostics, and a high-visibility color touchscreen. Whether you're repeating a production cycle or dialing in a specialized firing curve, the Sentinel puts power and control at your fingertips.
Optional Add-Ons
Furniture Kit:
6 - C-24H Shelves (26” octagon x ¾”)
1½” square posts, 6 each: 1”, 2”, 3”, 4”, 5”, 6”
1 lb. kiln wash
Kiln Stand Options:
Standard 6" stand with mar-proof plastic feet
12" Deluxe Rolling Stand (recommended if using the VentMaster Kiln Vent)
Kiln Vent:
The Orton Vent Master enhances firing results and removes fumes for a safer, cleaner studio environment.
Built with Pride in Mesquite, Texas
Every Paragon kiln is handcrafted in Mesquite, Texas by our skilled team of engineers and builders. The CT122822 Viking isn’t just a kiln—it’s a workhorse built for endurance, precision, and continuous performance.
When you choose Viking, you're not just choosing a kiln that lasts—you’re choosing one that’s ready for the heaviest loads, the hottest cycles, and the most demanding studios.
Built on the Ceramic Top legacy—fortified for production-grade performance.
The Paragon CT Series—short for Ceramic Top—has long been trusted for its thoughtful design, consistent results, and studio-friendly features. The Paragon CT122822 Viking takes that foundation and reinforces it for heavy-duty, high-demand firing environments. Whether you're running full-capacity loads of stoneware or supporting daily cycles in a busy studio or school, the Viking edition is built to perform—day after day, year after year.
Why choose the Paragon CT122822 Viking?
The CT122822 Viking is a 12-sided round kiln with an interior diameter of 28” and interior height of 22”, offering a generous 8.11 cubic feet of firing volume. It's the perfect blend of capacity and accessibility—wide enough for large platters and batch loads, yet shallow enough for ergonomic loading and unloading. Rated for cone 10 and optimized for high-volume work, it’s an ideal choice for production studios, ceramic departments, and institutions that can’t afford downtime.
Built Viking Strong: What Makes It Heavy-Duty?
What sets the Viking edition apart is its reinforced electrical and structural system, designed for longevity under tough conditions:
- Upgraded high-amperage components for continuous cone 10 operation
- Industrial-grade wiring and relays for better durability under frequent cycling
- Enhanced circuit pathways for improved power handling
- Heavy-duty case construction and internal bracing to support daily thermal stress
This isn’t just a kiln—it’s a dependable production tool engineered to run hot, hard, and reliably.
Durability Meets Convenience
- 3” thick firebrick throughout for exceptional insulation and energy efficiency
- Sectional construction allows for easier maintenance, transport, and ring replacement
- Solid state relay (SSR) for quiet, long-lasting, and responsive control
- AOP (Auxiliary Outlet Plug) and vent-ready design, pre-drilled for the Orton Vent Master
- Dropped, recessed element grooves—no pins required
- Top row of grooveless 2” blank bricks helps reduce chipping during loading
- Reversible firebrick floor extends the lifespan of your kiln bottom
- Drop-down switch box, hinged at the base and supported by a fold-out arm, for easy servicing
- Paragon’s patented LiteLid spring lift system enables smooth, one-hand lid lifting
- Lock-in lid support with positive catch
- Large, tapered peepholes for clear visibility
- Fire directly on the brick bottom for full capacity
- Heavy-duty stainless steel case
- Certified to CSA and UL Standard 499
Controlled with Precision
The CT122822 Viking is powered by the Sentinel Smart Touch Controller, offering advanced scheduling, cone-fire and ramp-hold options, diagnostics, and a high-visibility color touchscreen. Whether you're repeating a production cycle or dialing in a specialized firing curve, the Sentinel puts power and control at your fingertips.
Optional Add-Ons
Furniture Kit:
6 - C-24H Shelves (26” octagon x ¾”)
1½” square posts, 6 each: 1”, 2”, 3”, 4”, 5”, 6”
1 lb. kiln wash
Kiln Stand Options:
Standard 6" stand with mar-proof plastic feet
12" Deluxe Rolling Stand (recommended if using the VentMaster Kiln Vent)
Kiln Vent:
The Orton Vent Master enhances firing results and removes fumes for a safer, cleaner studio environment.
Built with Pride in Mesquite, Texas
Every Paragon kiln is handcrafted in Mesquite, Texas by our skilled team of engineers and builders. The CT122822 Viking isn’t just a kiln—it’s a workhorse built for endurance, precision, and continuous performance.
When you choose Viking, you're not just choosing a kiln that lasts—you’re choosing one that’s ready for the heaviest loads, the hottest cycles, and the most demanding studios.
Share:
Share on Facebook Share on Twitter Share on Pinterest