As per L&L's policy, you must supply us with the serial number and model number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.
Easy-Fire e18M 208 Volt/1 & 3 Phase Large Element (.46" Outside Diameter) - Used on All e18M & e18M-3 Kilns at this Voltage and Phase
There are 5 of these elements per kiln. All elements have the same resistance (ohm) value.
Please read carefully to ensure that you are purchasing the correct elements for your kiln. The voltage and phase are listed on the kiln nameplate. Phase is important with Easy-Fire kiln elements because power and resistance are varied to maximize output on 3-phase kilns. Elements in each kiln are all the same resistance. There are no graded elements from top to bottom.
Please note: As of October 1, 2004, L&L has developed a larger, improved element for the Easy-Fire kilns. These are ½" in diameter (the previous elements were ?" diameter) and are, in most cases, thicker gauge wire. These will only fit in the new holders which appeared in kilns manufactured after June 1, 2004.
As per L&L's policy, you must supply us with the serial number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.