Copper Jade Pint

1 Pint

SW-130 Copper Jade

Mayco’s line of Stoneware Glazes are available in a beautiful array of colors, tints and tones. They were developed to perform from mid-range (cone 4/6) to higher fire (cone 9/10) temperatures. These glazes work well on both stoneware and porcelain and are designed so that they do not run. Most of Mayco’s Stoneware Glazes are available in pre-mixed pints, as well as a dry mix.

Mayco’s Stoneware Glazes should be applied to bisqued ceramic pieces. If dipping, one coat of glaze is sufficient. Use 2-3 coats if brushing or spraying, allowing glaze to thoroughly dry in between each layer of application. The glazes can be fired from cone 4/6 to cone 9/10 in oxidation or reduction atmospheres. If using dry mixes, no sieving is necessary but it is recommended that the dry materials be mixed before adding water, in case some of the materials have settled in the bag. The ratio of water added to dry mix is approximately 1 pint of water (16 oz.) to 1 pound of dry glaze. Premixed glazes should be stirred well before being applied to pots or other ceramic wares.

The choice of clay body, thickness of glaze application, firing process and temperature will affect the fired results. We recommend that glazes always be tested on your clay body.

Mayco’s Stoneware Glazes are Food Safe, Non Toxic and Non Hazardous when used according to manufacturer's directions.

Glaze is fired to cone 6 in the first image, and cone 10 in the second.

Cone 6: Copper Jade fires to a gloss finish, producing colors that can range from brown-greens to creamy tan hues. Color breaks dark and can pool into red tones where thick. This glaze yields complex surfaces through movement and color variation.

Cone 10: Color changes to a red/brown with some black/copper mottling.

TIP: One coat will produce dark, greenish tones, thicker coats will add greens. Thickest applications will result in metallic red hues.