Cinnabar Pint
$ 9.71 New Available online
Mayco

Cinnabar Pint

$12.95 $9.71 $3.24

Item #: MSWG119P

Available Options:

Size:



Mayco’s line of Stoneware Glazes are available in a beautiful array of colors, tints and tones. They were developed to perform from mid-range (cone 4/6) to higher fire (cone 9/10) temperatures. These glazes work well on both stoneware and porcelain and are designed so that they do not run. Most of Mayco’s Stoneware Glazes are available in pre-mixed pints, as well as a dry mix.

Mayco’s Stoneware Glazes should be applied to bisqued ceramic pieces. If dipping, one coat of glaze is sufficient. Use 2-3 coats if brushing or spraying, allowing glaze to thoroughly dry in between each layer of application. The glazes can be fired from cone 4/6 to cone 9/10 in oxidation or reduction atmospheres. If using dry mixes, no sieving is necessary but it is recommended that the dry materials be mixed before adding water, in case some of the materials have settled in the bag. The ratio of water added to dry mix is approximately 1 pint of water (16 oz.) to 1 pound of dry glaze. Premixed glazes should be stirred well before being applied to pots or other ceramic wares.

The choice of clay body, thickness of glaze application, firing process and temperature will affect the fired results. We recommend that glazes always be tested on your clay body.

Mayco’s Stoneware Glazes are Food Safe, Non Toxic and Non Hazardous when used according to manufacturer's directions.

Cone 6: Cinnabar is a rich maroon-red gloss glaze that tends to develop a hazy purple float with heavier application.

Cone 10: Color darkens.

TIP: One to two coats will produce an opaque maroon-red; three+ coats will produce higher levels of purple float. You’ll produce beautiful color variations with Cinnabar without the glaze running off your ware during a cone 6 oxidation firing.




Share:  
       

JOIN OUR NEWSLETTER!