Black Walnut Pint
$ 8.44 New Available online
Mayco

Black Walnut Pint

$11.25 $8.44 $2.81

Item #: MSWG104P

Available Options:

Size:



1 pint.

SW-104 Black Walnut

This glaze produces an opaque black matte finish which breaks into reddish orange.

Mayco’s line of Stoneware Glazes are available in a beautiful array of colors, tints and tones. They were developed to perform from mid-range (cone 4/6) to higher fire (cone 9/10) temperatures. These glazes work well on both stoneware and porcelain and are designed so that they do not run. Most of Mayco’s Stoneware Glazes are available in pre-mixed pints, as well as a dry mix.

Mayco’s Stoneware Glazes should be applied to bisqued ceramic pieces. If dipping, one coat of glaze is sufficient. Use 2-3 coats if brushing or spraying, allowing glaze to thoroughly dry in between each layer of application. The glazes can be fired from cone 4/6 to cone 9/10 in oxidation or reduction atmospheres. If using dry mixes, no sieving is necessary but it is recommended that the dry materials be mixed before adding water, in case some of the materials have settled in the bag. The ratio of water added to dry mix is approximately 1 pint of water (16 oz.) to 1 pound of dry glaze. Premixed glazes should be stirred well before being applied to pots or other ceramic wares.

The choice of clay body, thickness of glaze application, firing process and temperature will affect the fired results. We recommend that glazes always be tested on your clay body.

Mayco’s Stoneware Glazes are Food Safe, Non Toxic and Non Hazardous when used according to manufacturer's directions.

Cone 6: Black Walnut is a dark brown soft matte glaze that breaks a rich warm brown.

Cone 10: Rich brown undertones come through.

TIP: The thinner the application, the lighter brown the color. The thicker the application, the darker the brown color. For a saturated opaque finish, apply 4+ coats. This glaze is high in manganese which allows it to combo well. Has a satin finish.




Share:  
       

JOIN OUR NEWSLETTER!