Janus-27 240V 1P
$ 3882.02 New Available online
Paragon

Janus-27 240V 1P

$4,313.36 $3,882.02 $431.34

Item #: PJAN27M2401N0

Available Options:

Voltage & Phase:

Controller Option:

Add Ons:



Paragon Janus-27 multimedia kiln, 240-volt, 1-phase.



The Janus-27 Glass/Pottery Kiln
The Paragon Janus-27 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.

Glass and clay firing modes
Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.

Imagine the glass and pottery you could fire in this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets in clay or glass. Make treasured gifts. When you own a Paragon kiln, you can experiment with new ideas to your heart’s content.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.

Advanced element grooves
The elements in the lid are mounted in a firebrick ball groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.

The lid on the Janus-27 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, we use 2" high blank wall bricks in the top row of the Janus-27. Since the brick is without element grooves, it is less susceptible to damage during loading.

Hinged control panel
The patented control box on the Janus-27 opens forward for easy maintenance. A folding support arm holds the box in the open position.

Heavy duty components
A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.

Refractory coating hardens the lid surface
Large, tapered peepholes offer a wide view of the firing chamber with little heat loss. The peepholes, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.

Made in America
And, of course, the Paragon Janus is made in America by skilled workers. Many of them have been with Paragon for over a decade.

Glass/pottery selection switch,/b>
- 3" insulating refractory firebrick walls
- Sidewall elements in dropped, recessed brick grooves are easy to replace.
- Tapered peepholes for a wide view
- A steel floor pan supports the entire brick bottom of each kiln.
- One year limited warranty
- Easy-access control box with folding support arm.
- Since the Janus-27 is designed for porcelain, it also easily fire ceramics, china paint, decals, gold and, of course, glass.

Thermocouple with "special limit" wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼" wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.

Heavy Duty Rolling Stand Included, 32" Square x 12" High
A deluxe kiln stand with locking casters is included at no extra charge. Enjoy the convenience of rolling the kiln out of the way when not in use. The stand is rock solid and ships assembled. It fits together with interlocking components for extra strength.

To install an Orton Kiln Vent, merely slide the collection cup into a mounting bracket on top of the stand.

Take advantage of the heat that radiates from the kiln by loading greenware on the shelf under the kiln. Heat from the kiln will dry the ware to prepare it for the next firing. Save time and energy.

Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.

Please note that free shipping is only valid for the contigious United States.


Max Firing Temp: Cone 10 (2350F)
Inside Dimensions (inches): 28 Width x 22.25 Deep
Cubic Feet: 8.11
Voltage: 240
Amps: 48
Watts: 11520
Plug: NEMA 6-50R
Shipping Weight: 500 lbs




Share:  
       

JOIN OUR NEWSLETTER!