L&L E18T Element 240V, 1-p
$ 67.00 New Available online

L&L E18T Element 240V, 1-p


Item #: LLE18TE2401

Available Options:

Voltage & Phase:


Add to List

As per L&L's policy, you must supply us with the serial number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.

This is an element for L&L kiln models e18T & e18T-3 at 240V, 1-phase (produced after 2004).
There are 6 elements in the E18T kiln.

L&L part #: E-E-18TL/31 (same as 3-phase).

Please read carefully to ensure that you are purchasing the correct elements for your kiln. The voltage and phase are listed on the kiln nameplate. Phase is important with Easy-Fire kiln elements because power and resistance are varied to maximize output on 3-phase kilns. Elements in each kiln are all the same resistance. There are no graded elements from top to bottom.

Please note: As of October 1, 2004, L&L has developed a larger, improved element for the Easy-Fire kilns. These are ½" in diameter and are, in most cases, thicker gauge wire. These will only fit in the new holders which appeared in kilns manufactured after June 1, 2004.

So, if your kiln was produced prior to June 2004, then you will need to purchase the SMALL (S) elements. Kilns after 2004 can accommodate the LARGE (L) elements.
It is required that you enter your kiln's serial number in the "Comments" section during checkout when ordering elements for L&L kilns.

As per L&L's policies, you must supply us with the serial number of your kiln when purchasing elements by using the "Comments" section during checkout.