L&L E28S Elements SS 240V, 1-p
$ 57.00 New Available online
L&L

L&L E28S Elements SS 240V, 1-p

$57.00

Item #: LLE28SESS2401

Available Options:

Element Size:

Voltage & Phase:



As per L&L's policy, you must supply us with the serial number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.

Replacement elements for L&L E28S kiln.

This is the element for the E-28S 240V, 1-phase kiln (produced before 2004). There are 4 elements in the E28S kiln.

L&L part #: E-E-28SX/31

Please read carefully to ensure that you are purchasing the correct elements for your kiln. The voltage and phase are listed on the kiln nameplate. Phase is important with Easy-Fire kiln elements because power and resistance are varied to maximize output on 3-phase kilns. Elements in each kiln are all the same resistance. There are no graded elements from top to bottom.

Please note: As of October 1, 2004, L&L has developed a larger, improved element for the Easy-Fire kilns. These are ½" in diameter (the previous elements were ?" diameter) and are, in most cases, thicker gauge wire. These will only fit in the new holders which appeared in kilns manufactured after June 1, 2004.

So, if your kiln was produced prior to June 2004, then you will need to purchase the SMALL (S) elements. Kilns after 2004 can accommodate the LARGE (L) elements.

As per L&L's policy, you must supply us with the serial number of your kiln when purchasing elements, which you may enter in the "Comments" section during checkout.




Share:  
       

JOIN OUR NEWSLETTER!